DAQ BNC-2090 Manual do Utilizador descarregar pdf (Página 10)



National Instruments Corporation 1-1 BNC-2090 User Manual

Introduction

Chapter

This chapter describes the BNC-2090 accessory, lists what you need to

get started, and describes the optional equipment.

About the BNC-2090

The BNC-2090 accessory is a rack-mount analog breakout accessory

with signal-labeled BNC connectors, spring terminal blocks, and analog

signal conditioning areas. The BNC-2090 accessory simplifies the

connection of analog signals and digital signals to the DAQ board for

use in laboratory, test, and production environments. You can configure

the BNC-2090 to use eight differential or 16 single-ended analog input

channels available on the accessory. The BNC-2090 has silkscreened

component locations for resistors and capacitors for building single-

pole highpass and lowpass filters and voltage dividers.

You can use the BNC-2090 with a 50, 68, or 100-pin MIO DAQ board

or a 50-pin PC-LPM-16 DAQ board. Refer to Appendix B,

Using the

PC-LPM-16

, for information on using the PC-LPM-16 with the

BNC-2090.

What You Need to Get Started

To set up and use your BNC-2090 accessory, you will need the

following:

❑

BNC-2090 accessory

❑

BNC-2090 User Manual

❑

One of the following DAQ boards and the appropriate cable

50-pin MIO board (requires SH6850 or R6850 cable)

68-pin MIO board (requires SH6868 or R6868 cable)

100-pin MIO board (requires SH1006868 cable)

PC-LPM-16 DAQ board (requires SH6850 or R6850 cable)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 54 55

Sem comentários

DAQ BNC-2090 Manual do Utilizador Página 10